Home   I  Aerospace Division   I   CBNU  I   Contact   I  Admin   

Introduction      I      Members      I    Research     I      Lecture       I      Downloads       I      BBS        I     Links

 

 

 

  

   

 

39

M. Y. Kim and G. W. Lee, Effects of Silica Addition on the Particle Characteristics and Phase Transition of Flame-Synthesized gamma-Al2O3 Nanoparticles, Journal of Mechanical Science and Technology, accepted for publication, January 2014.

38

K. J. Lee, S. W. Baek, M. Y. Kim, S. N. Lee, and W. C. Kim, The Effects of Heat Shielding in Jet Engine Exhaust Systems on Aircraft Survivability, Numerical Heat Transfer, Part A (Applications), accepted for publication, September 2013.

37

D. E. Lee and M. Y. Kim, "Optimum Residence Time for Steel Productivity and Energy Savings in a Hot Rolled Reheating Furnace," Journal of Mechanical Science and Technology, vol. 27, no. 9, pp. 2869-2877, September 2013.

36

J. H. Cho, S. S. Yu, M. Y. Kim, S. G. Kang, Y. D. Lee, K. Y. Ahn, and H.-J. Ji, Dynamic Modeling and Simulation of Hydrogen Supply Capacity from a Metal Hydride Tank, International Journal of Hydrogen Energy, vol. 38, no. 21, pp. 8813-8828. July 2013.

35

B. K. Yun and M. Y. Kim, Modeling the Selective Catalytic Reduction of NOx by Ammonia over a Vanadia-based Catalyst from Heavy Duty Diesel Exhaust Gases, Applied Thermal Engineering, vol. 50, No. 1, pp. 152-158, January 2013.

34

S. C. Mishra, M. Y. Kim, and S. Maruyama, Performance Evaluation of Four Radiative Transfer Methods in Solving Multi-Dimensional Radiation and/or Conduction Heat Transfer Problems, International Journal of Heat and Mass Transfer, vol. 55, nos. 21-22, pp. 5819-5835, October 2012.

33

Y. Lee and M. Y. Kim, "Catalytic Combustion Behaviors of Methane and Propane over the Pd-based Catalyst in the BOP for MCFC Power Generation Systems," Journal of Mechanical Science and Technology, vol. 26, no. 8, pp. 2259-2265, August 2012.

32

S. C. Mishra, Ch.H. Krishna, and M. Y. Kim, Analysis of Conduction and Radiation Heat Transfer in a 2-D Cylindrical Medium Using the Modified Discrete Ordinate Method and the Lattice Boltzmann Method, Numerical Heat Transfer, Part A (Applications), vol. 60, no. 3, pp. 254-287, August 2011

31

S. C. Mishra, A Stephen, and M. Y. Kim, Analysis of Non-Fourier Conduction-Radiation Heat Tranfer in a Cylindrical Enclosure, Numerical Heat Transfer, Part A (Applications), vol, 58, no. 12, pp. 943-962, December 2010.

30

S. C. Mishra, Ch. H. Krishna, and M. Y. Kim, Lattice Boltzmann Method and Modified Discrete Ordinate Method Applied to Radiative Transport in a Spherical Medium with and without Conduction, Numerical Heat Transfer, Part A (Applications), vol. 58, no. 11, pp. 852-881, December 2010.

29

M. Y. Kim, S. Menon, and S. W. Baek, On the Transient Radiative Transfer in a One-Dimensional Planar Medium subjected to Radiative Equilibrium, International Journal of Heat and Mass Transfer, vol. 53, nos. 25-26, pp. 5682-5691, December 2010.

28

J. H. Kim, M. Y. Kim, and H. G. Kim, "NO2-Assisted Soot Regeneration Behavior in a Diesel Particulate Filter with Heavy-Duty Diesel Exhaust Gases," Numerical Heat Transfer, Part A (Applications), vol. 58, no. 9, pp. 725-739, November 2010.

27

J. H. Jang, D. E. Lee, M. Y. Kim, and H. G. Kim, Investigation of the Slab Heating Characteristics in a Reheating Furnace with the Formation and Growth of Scale on the Slab Surface, International Journal of Heat and Mass Transfer, vol. 53, no.19-20, pp.4326-4332, September 2010.

26

C. Kim, M. Y. Kim, M. J. Yu, and S. C. Mishra, Unstructured Polygonal Finite Volume Solutions of Radiative Heat Transfer in a Complex Axisymmetric Enclosure, Numerical Heat Transfer, Part B (Fundamentals), vol. 57, no. 3, pp. 227-239, March 2010.

25

Y. K. Hong, S. W. Baek, and M. Y. Kim, Inverse Natural Convection Problem with Radiation in Rectangular Enclosure, Numerical Heat Transfer, Part A (Applications), vol. 57, no. 5, pp. 315-330, March 2010.

24

S. C. Mishra, M. Y. Kim, R. Das, M. Ajith, and R. Uppaluri, Lattice Boltzmann Method Applied to the Analysis of Transient Conduction-Radiation Problems in a Cylindrical Medium, Numerical Heat Transfer, Part A (Applications), vol. 56, no.1, pp.42-59, July 2009

23

I. S. Park and M. Y. Kim, Numerical Investigation of the Heat and Mass Transfer in a Vertical Tube Evaporator with the Three Zone Analysis, International Journal of Heat and Mass Transfer, vol. 52, no. 11-12, pp. 2599-2606, May 2009.

22

S. H. Han, S. W. Baek, and M. Y. Kim, Transient Radiative Heating Characteristics of Slabs in a Walking Beam Type Reheating Furnace, International Journal of Heat and Mass Transfer, vol. 52, no. 3-4, pp. 1005-1011, January 2009.

21

J. H. Jang, D. E. Lee, C. Kim, and M. Y. Kim, Prediction of Furnace Heat Transfer and Its Influence on the Steel Slab Heating and Skid Mark Formation in a Reheating Furnace, ISIJ International, vol. 48, no. 10, pp. 1325-1330, October 2008.

20

M. Y. Kim, Assessment of the Axisymmetric Radiative Heat Transfer in a Cylindrical Enclosure with the Finite Volume Method, International Journal of Heat and Mass Transfer, vol. 51, no. 21-22, pp. 5144-5153, October 2008.

19

M. Y. Kim, S. W. Baek, and C. Y. Lee, Prediction of Radiative Heat Transfer between Two Concentric Spherical Enclosures with the Finite Volume Method, International Journal of Heat and Mass Transfer, vol. 51, no. 19-20, pp. 4820-4828, September 2008.

18

M. Y. Kim, S. W. Baek, and I. S. Park, Evaluation of the Finite Volume Solutions of Radiative Heat Transfer in a Complex Two-Dimensional Enclosure with Unstructured Polygonal Meshes, Numerical Heat Transfer, Part B (Fundamentals), vol. 54, no. 2, pp. 116-137, August 2008.

17

M. Y. Kim, J. H. Cho, and S. W. Baek, Radiative Heat Transfer between Two Concentric Spheres Separated by Two-Phase Non-Gray Gas and Particles using the Modified Discrete Ordinates Method, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 109, no. 9, pp. 1607-1621, June 2008.

16

M. Y. Kim, M. J. Yu, J. H. Cho, and S. W. Baek, Influence of Particles on the Radiative Base Heating from the Rocket Exhaust Plume, AIAA Journal of Spacecraft and Rockets, vol. 45, no. 3., pp. 454-458, May 2008.

15

D. Hong, C. Kim, M. Y. Kim, S. M. Lee, and K. Y. Ahn, A Numerical Study on the Flow Characteristics in the Mixing Region of the Catalytic Combustor, Journal of Mechanical Science and Technology, vol. 21, no. 11, pp. 1791-1798, November 2007.

14

S. Lee, S. W. Baek, M. Y. Kim, and Y. M. Sohn, Numerical Investigation of the Combustion Characteristics and Nitric Oxide Formation in a Municipal Waste Incinerator, Numerical Heat Transfer, Part A (Applications), vol. 52, no. 8, pp. 713-735, October 2007.

13

M. Y. Kim, A Heat Transfer Model for the Analysis of Transient Heating of the Slab in a Direct-Fired Walking Beam Type Reheating Furnace, International Journal of Heat and Mass Transfer, vol. 50, no.19-20, pp. 3740-3748, September 2007.

12

M. Y. Kim and S. W. Baek, Modeling of Radiative Heat Transfer in an Axisymmetric Cylindrical Enclosure with Participating Medium, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 90, nos. 3-4, pp. 377-388, February 2005.

11

K. W. Kim, S. W. Baek, M. Y. Kim, and H. S. Ryou, Estimation of Emissivities in a Two-Dimensional Irregular Geometry by Inverse Radiation Analysis using HybridGenetic Algorithms, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 87, no. 1, pp. 1-14, August 2004.

10

D. Y. Byun, S. W. Baek, and M. Y. Kim, Investigation of Radiative Heat Transfer in Complex Geometries using Blocked-Off, Multi-Block, and Embedded Boundary Treatments, Numerical Heat Transfer, Part A (Applications), vol. 43, no. 8, pp. 807-825, June 2003.

9

S. W. Baek, H. S. Kim, M. J. Yu, S. J. Kang, and M. Y. Kim, Application of the Extended Weighted Sum of Gray Gases Model to Light Fuel Oil Spray Combustion, Combustion Science and Technology, vol. 174, no. 7, pp. 37-70, July 2002.

8

M. Y. Kim, S. W. Baek, and J. H. Park, Unstructured Finite Volume Method for Radiative Heat Transfer in a Complex Two-Dimensional Geometry with Obstacles, Numerical Heat Transfer, Part B(Fundamentals), vol. 39, no. 6, pp. 617~635, June 2001.

7

D. Y. Byun, S. W. Baek, and M. Y. Kim, Thermal Radiation in a Discretely Heated Irregular Geometry using the Monte-Carlo, Finite-Volume, and Modified Discrete-Ordinates Interpolation Methods, Numerical Heat Transfer, Part A(Applications), vol. 37, no. 1, pp. 1~18, January 2000.

6

S. W. Baek, M. Y. Kim, and J. S. Kim, Nonorthogonal Finite-Volume Solutions of Radiative Heat Transfer in a Three-Dimensional Enclosure, Numerical Heat Transfer, Part B (Fundamentals), vol. 34, no. 4, pp. 419~437, December 1998.

5

M. Y. Kim and S. W. Baek, Radiative Heat  Transfer in a Body-Fitted Axisymmetric Cylindrical Enclosure, AIAA Journal of  Thermophysics and Heat Transfer, vol. 12, no. 4, pp. 596~599, October 1998.

4

S. W. Baek and M. Y. Kim, Analysis of Radiative Heating of a Rocket Plume Base with the Finite-Volume Method, International Journal of Heat and Mass Transfer, vol. 40, no. 7, pp. 1501~1508, May 1997.

3

M. Y. Kim and S. W. Baek, Analysis of Radiative Transfer in Cylindrical Enclosures using the Finite Volume Method, AIAA Journal of Thermophysics and Heat Transfer, vol. 11, no. 2, pp. 246~252, April 1997.

2

S. W. Baek and M. Y. Kim, Modification of the Discrete-Ordinates Method in an Axisymmetric Cylindrical Geometry, Numerical Heat Transfer, Part B (Fundamentals), vol. 31, no. 3, pp. 313~326, April 1997.

1 M. Y. Kim and S. W. Baek, Numerical Analysis of Conduction, Convection, and Radiation in a Gradually Expanding Channel, Numerical Heat Transfer, Part A (Applications), vol. 29, no. 7, pp. 725~740, May 1996.